(Disposing On Spring Actuator - OS32.30-P-0620-01A)
MODEL 140, 210 with CODE (480) Rear axle level control system with CODE (217) Level control on rear axle with ADS MODEL 202, 203.2, 208 with CODE (480) Rear axle level control system MODEL 129 with CODE (216) Adaptive damping system (ADS) with level control with CODE (216) Adaptive damping system (ADS II) with electronic level control MODEL 215, 220, 231 with CODE (487) Active Body Control (ABC) MODEL 211, 216, 219, 221, 230, 240
| Risk of injury to skin or eyes caused by hydraulic fluid spraying out under high pressure. Risk of poisoning caused by swallowing hydraulic fluid | Depressurize hydraulic system completely before starting any work on system. Wear protective clothing and safety glasses. | AS00.00-Z-0013-01A | |
| Risk of injury caused by drilling gas-filled assemblies or components (noncombustible gases) | Wear safety glasses and a face mask. | AS00.00-Z-0006-01A |
- Allow hydraulic fluid or brake fluid to flow out of the oil gallery (a) into a suitable container for disposal.
- Drill gas chamber (b) of the spring accumulator on the arched side (arrow) with a drill bit (3 mm dia.) until the gas flows out.
- Dispose of spring brake reservoir as scrap metal.