LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2023 >> GLE350 Base >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Seats, Bunks, Restraint Systems -- 167 Chassis (1 Of 3) >> Testing & Repair >> Remove/Install Front Passenger Airbag - AR91.60-P-0664ME

Remove/Install Front Passenger Airbag - AR91.60-P-0664ME

Model 167 

MODIFICATION NOTES

10.09.2019 Repair method completely changed.    
G15047454Courtesy of MERCEDES-BENZ USA
G15047455Courtesy of MERCEDES-BENZ USA
Fig 1: Front Passenger Airbag Components Location - Model 167 (Shown With Code 494)
G15047456Courtesy of MERCEDES-BENZ USA

Shown With Code 494 (USA version) 

WARNING Risk of injury  during testing and repair operations related to pyrotechnical components Do not expose pyrotechnical component parts to temperatures above 100°C or 212°F. Disconnect current supply when working on such component parts. AS91.00-Z-0008-01A 
Notice  Information on preventing damage to electronic components due to electrostatic discharge   AH54.00-P-0001-01A
Notice  Notes on self-locking nuts and bolts   AH00.00-P-0001-01KOA
  Notes on safety-relevant components   AH00.00-Z-0019-01A
  Information, assessment and legal requirements when working with, handling and storing pyrotechnical components   AH91.00-Z-0000-10A 
REMOVINGREMOVING Remove/install     
1 Open cover of armrest at center console (1).    
2 Remove insert (2) and remove nuts (3).    
3 Unclip cover (4) and remove screws (5).    
4 Unclip covers (6) and remove screws (7).    
5 Slide center console (1) to rear approx. 2 cm with lines connected.    
6 Remove A-pillar trim on front passenger side.   AR68.30-P-4050ME
7 Detach ground line of on-board electrical system battery.   AR54.10-P-0003ME
8 Remove glove box.   AR68.10-P-1400ME
9 Remove display module.   AR54.30-P-6023ME
10 Remove screws (8).    
11 Unclip air duct (9) from instrument panel (10) and from crossmember and place to one side.    
12 Disconnect electrical connectors (11). IMPORTANT The number of electrical connectors (11) varies depending on the national version.  
    SPECIAL TOOL Removal lever Fig 2
13 Remove bolt (12). TORQUE SPECIFICATION Bolt/nut, front passenger airbag to instrument panel crossmember *BA91.60-P-1003-01R 
14 Remove nuts (13). TORQUE SPECIFICATION Nut, front passenger airbag unit to instrument panel *BA91.60-P-1002-01R 
15 Carefully pull trim (14) toward rear (arrow A) until the retaining lugs are extended out of the instrument panel (10).    
16 Lift instrument panel (10) on front passenger side (arrow B) and move front passenger airbag (15) downwards.    
17 Install in the reverse order.    
18 Check Supplemental Restraint System (SRS) using vehicle diagnosis system.    
REFER TO SELF-DIAGNOSTIC SYSTEMS     AD00.00-P-2000-06ME
AIRBAG

Number Designation Model 167
BA91.60-P-1002-01R Nut, front passenger airbag unit to instrument panel Nm 5
AIRBAG

Number Designation Model 167
BA91.60-P-1003-01R Bolt/nut, front passenger airbag to instrument panel crossmember Nm 6
Fig 2: Identifying Removal Lever (203 589 04 33 00)
G14549937Courtesy of MERCEDES-BENZ USA