Adjust Reading Lamp In Inside Rearview Mirror To Steering Variant - AR68.40-P-0001-01MFA
Model 118, 177, 243, 247
with code 232 (Garage door opener with frequency 284-390 MHz)
Model 118, 177, 243, 247
with code U62 (Exterior light and sight package)
Model 118, 177, 247
with code 231 (Garage door opener)
The left reading lamp (1) and right reading lamp (2) must be adjusted according to the vehicle steering variant to prevent the driver from being blinded.
The cutout (arrow A) on the lens (3) must be adjusted to mark "R" (a) in right-hand drive vehicles and to mark "L" (b) in left-hand drive vehicles.
- Using retaining ring pliers, adjust lens (3) of left reading lamp (1) and right reading lamp (2) on cutouts (arrow A, arrow B) to appropriate marking "R" (a) or "L" (b).
Carefully turn lens (3).
Otherwise, the lens (3) may be damaged.
Use lock ring pliers with tip diameter of max. 1.3 mm and an opening of min. 20 mm.
Shown on inside rearview mirror (A67)