Suspension -- 247 Chassis
- Description & Operation
- General Information
- General Notes On Working On Vehicles With Level Control/ADS - AH32.00-P-0002-01A
- Notes On Checking Oil Level On Vehicles With Level Control/ADS - AH32.00-P-0003-01A
- General Notes: Passenger Cars: Suspension - AH32.00-Z-9999AZ
- Notes On Air Suspension - AH32.22-P-1000-01T
- Information On E-Active Body Control Suspension - AH32.50-P-0002-01ME
- Basic Knowledge
- Spring Element, Basic Function - GF32.00-P-1000A
- Suspension And Damping, Basic Function - GF32.00-P-9900A
- Air Suspension, Basic Function - GF32.22-P-1000A
- Air Suspension Control Unit, Basic Function - GF32.22-P-9890A
- Shock Absorber, Basic Function - GF32.25-P-1001A
- Level Sensor, Basic Function - GF32.31-P-2001A
- Adaptive Damping System, Basic Function - GF32.32-P-1004A
- Damping Valve Unit, Basic Function - GF32.32-P-2002A
- Adaptive Damping System (ADS) Control Unit, Basic Function - GF32.32-P-9891A
- Level Control On Rear Axle, Basic Function - GF32.32-P-9900A
- Active Roll Stabilization, Basic Function - GF32.34-P-1000A
- Electrohydraulic Suspension, Basic Function - GF32.50-P-1008A
- Safety Precautions
- Testing & Repair
- Locate Suspension Noises - AR32.00-P-2000A
- Tension/Release Front Axle Spring - AR32.20-P-0200-05MFA
- Tension Rear Axle Spring - AR32.20-P-0202-06MFA
- Remove/Install Rear Axle Spring
- Remove/Install Stabilizer Bar On Front Axle - AR32.20-P-0300MFA
- Remove/Install Torsion Bar On Rear Axle - AR32.20-P-0315MFA
- Remove/Install Rear Shock Absorber - AR32.25-P-0110MFA
- Checking Shock Absorber - AR32.25-P-0121MFA
- Remove/Install Front Suspension Strut - AR32.25-P-1017MFA
- Disassemble/Assemble Suspension Strut - AR32.25-P-1018MFA
- Remove/Install ADS Control Unit - AR32.32-P-0500MFA
- Remove/Install Front Stabilizer Bar Linkage - AR32.35-P-3330MFA
- Test & Adjustment Values
- Maintenance
- Capacities & Specifications
- Torque Specifications
- Miscellaneous Notes
- Scrapping Pressure Reservoirs For Level Control And Hydropneumatic Suspension, Central Reservoirs For Hydropneumatic Suspension - OS32.00-P-1000-01A
- Scrapping Gas-Filled Shock Absorbers - OS32.25-P-1000-01A
- Scrapping Hydropneumatic Compensating Springs - OS32.40-P-1000-01A
- Disposal Of Lateral Acceleration Switches For Hydropneumatic Suspension Containing Mercury - OS32.40-P-1000-02A
- Wiring Diagrams
- Special Tools
- 001 589 03 16 00 Socket Set - WS32.00-P-0026B
- 177 589 00 32 00 Adapter Plate - WS32.00-P-0030B
- 177 589 02 32 00 Adapter - WS32.00-P-0031B
- 202 589 01 31 00 Tensioning Device - WS32.00-P-0040B
- 203 589 01 31 00 Tensioning Device - WS32.00-P-0052B
- 177 589 03 32 00 Adapter Plate - WS32.00-P-0058C
- 164 589 01 63 00 Clamping Plates - WS32.00-P-0079B
- 204 589 00 63 00 Clamping Plate - WS32.00-P-0095B
- 177 589 01 31 00 Tensioning Device - WS32.00-P-0096B
- 212 589 00 63 00 Adapter Plate - WS32.00-P-0098B
- 000 589 12 28 02 Replacement Knife - WS32.00-Z-3046-01KOD
- 000 589 12 28 00 Knife - WS32.00-Z-3046KOD