LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2023 >> GLA45 AMG >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Automatic Transmission (2 Of 2) -- 118 Chassis) >> Testing & Repair >> Install Tapered Roller Bearing Outer Race In Clutch Housing - AR27.40-P-0520-02MFA

Install Tapered Roller Bearing Outer Race In Clutch Housing - AR27.40-P-0520-02MFA

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Transmission 724.1 in model 118, 177, 247 

Fig 1: Identifying Insertion Tool (724 589 01 35 00)
G16049736Courtesy of MERCEDES-BENZ USA

IMPORTANT The following special tool is required: SPECIAL TOOL Insertion device.

IMPORTANT Replace tapered roller bearing outer race (52L) after each removal.

  1. Press tapered roller bearing outer race (52L) all the way into coupling housing (27K) using SPECIAL TOOL Insertion device (01).
G14688669Courtesy of MERCEDES-BENZ USA
scientia non olet · About LEMON Manuals