Retrofit Control Unit - AZ82.20-P-0001-05MFH
Model 247.7
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A |
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1084-02A | Binder Duotec® Pilz in Pilz Klett - with adhesive 32 | Klettband Technik Schultz UG Schulstrasse 6 71111 Waldenbuch Germany Tel.: +49 (0) 7157 6754-83 or 82 Fax: +49 (0) 7157 6696815 info@klettband-technik.de http://www.klettband-technik.de |
- Stick felt tape (13) to upper side of control unit (4).
- Stick hook-and-loop tape strips (12) to underside of control unit (4).
- Attach black 18-pin contact socket (1.3) to control unit (4).
- Detach carrier film from hook-and-loop tape strips of control unit (4).
- Position control unit (4) on transmission tunnel and press on evenly.
- Strap down excess line lengths of wiring harness for illuminated door sill molding and fix in place with cable ties.