Read Out Map Data Status From Navigation System - AP82.85-P-8251E
Model 118, 177, 247
| Read out navigation system | |||
| 1 | Read out map version using COMAND. | Switch on COMAND → Select menu item "Menu" → Select "Settings" menu item → Select "Extended settings" menu item → Select menu item "Map version". |
|
| Check | |||
| 2 | Note the map version displayed on the service sheet and compare with the map version currently available. | If the map status is up-to-date, ↓ testing is complete; no further work steps are necessary. If the map data release is not up-to-date, ↓ Continue with operation step 3. |
|
| 3 | Check whether the customer is entitled to a free-of-charge map update. | Initial registration was a maximum of 3 years ago. Only for certain markets (see Service Information bulletin). If the customer is entitled to a free-of-charge map update, ↓ update map data free of charge (For cost settlement, see service information). * Map update, ↓ |
|
| Service Information: Free map updates for COMAND If the customer is not entitled to a free-of-charge map update, ↓ clarify with the customer whether a chargeable map update should be performed; continue with operation step 4. |
SI82.85-P-0019A | ||
| 4 | Check whether the customer wants a chargeable map update. | ||
| Service Information: Free map updates for COMAND | If the customer does not want a chargeable map update, ↓ Testing is complete; no further work steps are necessary. If the customer wants a chargeable map update, ↓ update map. |
SI82.85-P-0019A | |
| Model 118, 177, 247 with code 548 (Connect 20 MID (NTG6)) Model 118, 177, 247 with code 549 (Connect 20 HIGH (NTG6)) |
AR82.85-P-0100LWG |