Remove/Install Front Passenger AIRBAG - AR91.60-P-0664MFB
Model 243, 247
Shown on model 243
| Risk of injury during testing and repair operations related to pyrotechnical components | Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts. | AS91.00-Z-0008-01A | |
| Notice | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Notice | Notes on self-locking nuts and bolts | AH00.00-P-0001-01KOA | |
| Notes on safety-relevant components | AH00.00-Z-0019-01A | ||
| Information, assessment and legal requirements when working with, handling and storing pyrotechnical components | AH91.00-Z-0000-10A | ||
| Remove/install | |||
| 1 | Clamp off ground line of on-board electrical system battery (G1). | AR54.10-P-0003MFA | |
| 2 | Remove glove compartment. | AR68.10-P-1400MFA | |
| 3 | Release and disconnect electrical connectors (1). | Fig 2 | |
| 4 | Remove ground clip (2). | *BA91.60-P-1007-01Q | |
| 5 | Remove screws (3). | *BA91.60-P-1003-01Q | |
| 6 | Remove nuts (4). | *BA91.60-P-1002-01Q | |
| 7 | Remove front passenger airbag (5). | ||
| 8 | Install in the reverse order. | ||
| Check | |||
| 9 | Check Supplemental Restraint System (SRS) using vehicle diagnostic system. | When replacing the front passenger airbag (5). | |
| AD00.00-P-2000-06MFA |
AIRBAG
| Number | Designation | Model 243 | Model 247 | |
|---|---|---|---|---|
| BA91.60-P-1002-01Q | Nut, front passenger airbag unit to instrument panel | Nm | 5 | 5 |
AIRBAG
| Number | Designation | Model 243 | Model 247 | |
|---|---|---|---|---|
| BA91.60-P-1003-01Q | Bolt, front passenger airbag unit to instrument panel | Nm | 3, 5 | 3, 5 |
AIRBAG
| Number | Designation | Model 243 | Model 247 | |
|---|---|---|---|---|
| BA91.60-P-1007-01Q | Bolt, ground connection of front passenger airbag to crossmember below instrument panel | Nm | 3, 5 | 3, 5 |