Remove/Install Cover For Backrest At Front Seat - AR91.10-P-8656MFA

Model 118, 177, 247 

with code 7U2 (Luxury front seats) 

except code 555 (AMG-Performance Seat) 

Model 243 

with code 7U2 (Luxury front seats) 

Model 243 

with code 7U4 (Sports seats for driver and front passenger) 

Courtesy of MERCEDES-BENZ USA

Notice	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Remove left or right front seat.		AR91.10-P-1000MFA
2	Remove seat backrest trim (2).		AR91.10-P-1912MFA
3	Remove outer trim from seat frame.		AR91.10-P-1201MFA
4	Remove inner trim from seat frame.		AR91.10-P-1202MFA
5	Remove head restraint guides from front seat.		AR91.16-P-0051MFA
6	Unhook shackles (arrows) of seat cover (1) from seat frame.	Dismantling tool	Fig 1
7	Release and disconnect electrical connector (3), and place electrical wiring harness to one side.	The number of electrical connectors varies according to vehicle equipment.
8	Remove seat cover (1) with padding (5) from seat frame base.
9	Detach seat cover (1) from padding (5) until retaining clamps (4) are accessible.
10	Separate retaining clamps (4) and remove remaining pieces from padding (5).	Remove remaining pieces of retaining clamps (4) carefully. Otherwise padding (5) and seat cover (1) will be damaged. : Replace retaining clamps (4).
		Padding clip pliers	Fig 2
11	Remove seat cover (1) from padding (5).
12	Install in the reverse order.

Fig 1: Identifying Dismantling Tool (205 589 02 63 00)

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Padding Clip Pliers (454 589 03 37 00)

Courtesy of MERCEDES-BENZ USA