DC/AC Converter, Basic Function - GF54.10-P-1013A

Model All (CAR) 

with code U67 (230 V socket in rear passenger compartment) 

Model All (CAR) 

with code U80 (115 V socket) 

Overview 

This document contains information on:

• General 
• Function requirements 
• Function 

General 

The DC/AC converter makes it possible to operate small electrical devices that have to be powered with an alternating voltage of 115 V or 230 V. The maximum available continuous electrical load is 150 W, also briefly permissible for 2 s is a load up to 300 W.

Function requirements 

• Circuit 15 ON

Function 

A consumer that is connected to the socket is detected by a microswitch.

The DC/AC converter converts the on-board electrical system direct voltage into alternating voltage and supplies power to the socket. An LED in the socket indicates the availability of the AC voltage.

If the energy management detects an undervoltage, the DC/AC converter is switched off and the power supply to the socket is interrupted.

	Additional basic functions
	DC/AC converter control unit, basic function		GF54.10-P-9890A
	Socket, basic function		GF54.10-P-2010A