Remove/Install Front Fender Liner - AR88.10-P-1301MFA

Model 118, 177, 247 

MODIFICATION NOTES

04.11.2019

General information added.

Operation step 3 and 10

Courtesy of MERCEDES-BENZ USA

Shown on model 177 

	Risk of death  caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
	Remove/install front section of the front fender liner (7)
1	Lift vehicle with lifting platform.		AR00.60-P-1006A
2	Remove screw/bolts (3).
3	Remove expansion rivets (4).	The number can vary depending on the model and equipment.
		Dismantling tool	Fig 1
4	Remove screw (5).
5	Unscrew nuts (6, 10).
6	Remove front section of the front fender liner (7).
7	Install in the reverse order
	Remove/install rear section of the front fender liner (1)
8	Lift vehicle with lifting platform.		AR00.60-P-1006A
9	Unscrew bolts (2).
10	Remove expansion rivet (9).	The number can vary depending on the model and equipment.
		Dismantling tool	Fig 1
11	Remove screw (5).
12	Unscrew nuts (8, 10).
13	Remove rear section of the front fender liner (1).
14	Install in the reverse order

Fig 1: Identifying Dismantling Tool (000 589 95 63 00)

Courtesy of MERCEDES-BENZ USA