Remove/Install Bearing Of Transmission Mounting - AR27.10-P-0002MFA

Transmission 700.42 in Model 118, 177, 247 

Transmission 724.0 in Model 118, 177, 247 

Transmission 724.1 in Model 118, 177, 247 

Shown on Model 177 with engine 654 

Fig 1: Transmission Mount Components Location - Transmission 724.1 In Model 118

Courtesy of MERCEDES-BENZ USA

	Risk of death  when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)	Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. Transmission 724.1 in Model 177, 247 with engine 282 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))	AS00.00-Z-0035-01A
	Risk of injury.  Moving parts can pinch, crush or, in extreme cases even sever extremities.	No parts of the body or limbs should be within the operating area of mechanical components when moving components.	AS00.00-Z-0009-01A
	Risk of injury.  Skin or eye injuries may result when handling hot or glowing objects.	Wear protective gloves, protective clothing and safety glasses, if necessary.	AS00.00-Z-0002-01A
	Risk of injury  caused by scraping or cutting body parts on sharp vehicle parts	Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels.	AS00.00-Z-0017-01A
Topical note	Notes on bolted connections with self tapping screws		AH00.00-P-0007-01SF
Topical note	General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment	Transmission 724.1 in Model 177, 247 with engine 282 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))	AH00.00-Z-0300-01A
	Remove/install
1	Attach Transmission unit support fixture.	Transmission 700.42 in Model 118, 177, 247 with engine 282 Transmission 700.42 in Model 118, 177, 247 with engine 608 Transmission 724.0 in Model 118, 177, 247 with engine 260 Transmission 724.1 in Model 118, 177, 247 with engine 139 Transmission 724.1 in Model 118, 177, 247 with engine 260 Transmission 724.1 in Model 118, 177, 247 with engine 282 Transmission 724.1 in Model 118, 177, 247 with engine 654	AR01.10-P-0107MFA
2	Remove battery carrier.		AR54.10-P-0028MFA
3	Remove nut (7).	Screw/nut, holder to Transmission mount/body	*BA22.10-P-1011-03P
4	Remove screw (4) and remove holder (2).	Screw/nut, holder to Transmission mount/body	*BA22.10-P-1011-03P
5	Remove nut (6) and detach ground line (8) from Transmission suspension bearing (1).	Nut, ground strap to Transmission mount	*BA00.19-P-1040-02E
6	Remove screws (5).	Screw, Transmission mount to body/transmission/mounting support	*BA22.10-P-1010-03P
7	Remove bolts (3).	Screw, Transmission mount to body/transmission/mounting support	*BA22.10-P-1010-03P
8	Remove Transmission suspension bearing (1) upward.
	Check
9	Check Transmission suspension bearing (1) for damage.	If damage is visible ↓ replace Transmission suspension bearing (1).
10	Install in the reverse order.