Install Tapered Roller Bearing Outer Race In Transmission Housing - AR27.40-P-0510-02MFA
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Transmission 724.1 in model 118, 177, 247
The following special tool is required:
Insertion device.
Replace tapered roller bearing outer race (52L) after each removal.
- Insert differential spacer ring (52E) into transmission housing (27G).
- Press tapered roller bearing outer race (52L) all the way into transmission housing (27G) using
Insertion device (01).
When doing so, make sure that the differential spacer ring (52E) is in the correct position.
Shown on Transmission with code M005 (4MATIC)