Risk Of Death Caused By Body Parts Being Pulled In By Rotating Vehicle Wheels And Roller Dynamometer Rollers - AS00.00-Z-0019-01A
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model All (4xWD, CAR, Light transporter, smart)
Do not insert your hand into rotating parts. Wear closed and close-fitting work clothes.
Secure areas with rotating vehicle parts and test stand rollers against unauthorized access.
Secure roller dynamometer against unauthorized use.
Risk of death
Severe injuries could be caused by rotating parts in the area of the running engine, the drivetrain and the rotating test stand rollers and vehicle wheels.
When performing operations on the roller dynamometer, appropriate shielding (e.g. barrier, safety guards) must be used to protect blind areas from unauthorized access.
Safety instructions/precautions
- Always observe the general safety specifications for roller dynamometers.
- Wear closed and close-fitting work clothes.
- Remove all items of jewelry (chains, rings, etc.).
- Wear suitable head wear to cover long hair.
- Operate roller dynamometers only within the prescribed capacity limits.
- Ensure that all persons remain outside of the hazard area of rotating wheels, shafts and test stand rollers when the roller dynamometer is in or ready for operation.
- During testing, the driver seat may only be vacated in case of emergency.
- When not in use, secure roller dynamometers from unauthorized use by locking the main switch.
- If the roller dynamometer has an integrated work pit, this must be secured after use.