Prepare Engine Support Fixture For Removal Of Engine/Transmission Unit - AR01.10-P-0105-03MFA
Engine 139, 260, 282, 608, 654 in model 118, 177, 247
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | AS00.00-Z-0010-01A | |
| Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. | AS00.00-Z-0009-01A | |
| Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels. |
AS00.00-Z-0017-01A | |
| 000 588 25 62 00 Lift table | WS01.00-P-0264A |
All parts required for assembly on vehicle can be found in
support fixture set.
- Install uprights C (13) at lifting platform (25).
Uprights C (13) can be found in
support fixture set.
- Attach and secure plate (05) on uprights C (13).
The marking "TOP" on plate (05) must point upwards.
Arrow of plate (05) must point in direction of travel.
Preparation for removal of engine-transmission unit