Tightening Procedure For Charge Air Distributor - AR09.41-P-8683-01MSA
Engine 254.9, 256.9
| Topical note | Notes on threaded connections fastened using a tightening angle-based tightening process | AH00.00-P-0020-01A |
MODIFICATION NOTES
| 17.03.2020 | New operation steps added. | Operation steps 3 and 4. |
CHARGE AIR PIPE/CHARGE AIR COOLING
| Number | Designation | Engine 254 | ||
|---|---|---|---|---|
| BA09.41-P-1001-01GA | Screw, charge-air distributor to cylinder head/crankcase support/oil filter holder | Stage 1 | Nm | 8 |
| Stage 2 | ∠° | 30 | ||
CHARGE AIR PIPE/CHARGE AIR COOLING
| Number | Designation | Engine 256.9 | |
|---|---|---|---|
| BA09.41-P-1001-01MRT | Screw/bolt, charge air distributor to cylinder head | Nm | 8 |
Shown on engine 256.9