Remove/Install 360° Front Camera - AR54.30-P-3001FR
Model 257, 290
with code 501 (360° camera)
MODIFICATION NOTES
| 28.11.2019 | "Remove air duct segment on model 290" added. | Operation step 3. |
Shown on model 257
Shown on model 290
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Remove front bumper (1). | AR88.20-P-2000FR | |
| 2 | Unhook electrical line out of front bumper (1) (arrow). | ||
| 3 | Remove air duct segment (3). | Model 290 with code 501 (360° camera) |
|
| 4 | Unscrew bolts (2). | ||
| 5 | Remove camera of front 360° Camera (B84/9) from front bumper (1). | ||
| 6 | Install in the reverse order. | ||
| Calibrate | |||
| 7 | Calibrate front 360° camera (B84/9). | ||
| AD00.00-P-2000-06FR |