Remove/Install Glove Compartment - AR68.10-P-1402FR

Model 257, 290 

Courtesy of MERCEDES-BENZ USA

Shown on model 257 except code P21 (air quality package) 

Courtesy of MERCEDES-BENZ USA

Shown on model 257 with code P21 (air quality package) and with code 887 (separate trunk locking) 

	Remove/install
1	Remove trim piece from front passenger side instrument panel and place to one side.	Do not disconnect electrical connectors.	AR68.10-P-1187FR
2	Remove trim under front passenger side instrument panel.		AR68.10-P-1502FR
3	Remove bolts (5).
4	Remove screw/bolts (3).	One bolt (3) is located in the glove compartment (1) on right.
5	Pull out glove compartment (1) until the electrical connector (4) is accessible.	Push guides (6) of glove compartment (1) into instrument panel.
6	Detach air duct from glove compartment (1).
7	Disconnect electrical connection (4).
8	Disconnect electrical connector from separate trunk locking switch (S88/6).	Model 257 with code 887 (independent boot locking)
9	Disconnect electrical connector and hose from fragrance system alternator.	Model 257, 290 with code P21 (Air quality package)	AR83.40-P-0201FR
10	Remove glove compartment (1).
11	Remove separate trunk locking switch (S88/6) from the glove compartment (1).	Model 257 with code 887 (independent boot locking) When replacing glove compartment (1).
12	Remove fragrance system alternator from the glove compartment (1).	Model 257, 290 with code P21 (Air quality package) When replacing glove compartment (1).	AR83.40-P-0201FR
13	Remove glove compartment lamps from the glove compartment (1).	When replacing glove compartment (1).
14	Install in the reverse order.