Remove/Install Rear 3rd Seat Row Seat Belt Buckle - AR91.40-P-0006MEX

Model 167.9 

with code 845 (Electrically folding 3rd seat row) 

Courtesy of MERCEDES-BENZ USA

Topical note	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Remove/install
1	Remove rear seat.		AR91.12-P-0007MEX
2	Place rear seat onto seat backrest and fold sitting surface upward.
3	Remove expansion rivets (1) and take off trim (2).	Dismantling tool	Fig 1
4	Unclip electric line (3) from seat frame base (4).	Model 167.9 with code 845 (Electrically folding 3rd seat row) with code U01 (Status display for rear seat belts in instrument cluster)
5	Unscrew screw (5) and remove seat belt buckle (6).	Observe installation position of seat belt buckle (6) on seat frame base (4) (arrow). Screw, 3rd seat row seat belt end fitting/seat belt buckle screw to body/seat frame base	*BA91.40-P-1014-01U
6	Install in the reverse order.

SEAT BELTS/EMERGENCY TENSIONING RETRACTORS

Number	Designation		Model 167
BA91.40-P-1014-01U	Screw, 3rd seat row seat belt end fitting/seat belt buckle screw to body/seat frame base	Nm	35

Fig 1: Identifying Dismantling Tool (000 589 95 63 00)

Courtesy of MERCEDES-BENZ USA