Remove/Install Front Seat Side Airbag Unit - AR91.60-P-0695ME

Model 167 

Fig 1: Front Seat Side Airbag Unit Components Location - Model 167

Courtesy of MERCEDES-BENZ USA

	Risk of injury  during testing and repair operations related to pyrotechnical components	Do not expose pyrotechnical component parts to temperatures above 100°C or 212°F. Disconnect current supply when working on such component parts.	AS91.00-Z-0008-01A
Notice	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
Notice	Notes on self-locking nuts and bolts		AH00.00-P-0001-01KOA
	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Information, assessment and legal requirements when working with, handling and storing pyrotechnical components		AH91.00-Z-0000-10A
	Remove/install
1	Remove corresponding seat backrest trim.		AR91.10-P-1912ME
2	Disconnect the ground line for the on-board electrical system battery (G1).		AR54.10-P-0003ME
3	Unhook cover (3) on seat backrest frame (4) far enough until sidebag unit (1) is accessible.
4	Release and disconnect electrical connector (2) at sidebag unit (1).	Ensure correct engagement of electrical connector (2) at side airbag unit (1). Removal lever	Fig 2
5	Remove nut (5).	Nut, sidebag unit to backrest frame	*BA91.60-P-1009-01R
6	Remove nut (6) and remove with ground line (7).	Ground line (7) is secured to nut (6). Observe installation position of ground line (7). Nut, sidebag unit to backrest frame	*BA91.60-P-1009-01R
7	Remove sidebag unit (1) from seat backrest frame (4).
8	Install in the reverse order
	Check
9	Check Supplemental Restraint System (SRS) using vehicle diagnosis system.
			AD00.00-P-2000-06ME

AIRBAG

Number	Designation		Model 167
BA91.60-P-1009-01R	Nut, sidebag unit to backrest frame	Nm	7

Fig 2: Identifying Removal Lever (203 589 04 33 00)

Courtesy of MERCEDES-BENZ USA