Remove/Install Rear Door Lock - AR72.12-P-2511ME

Model 167 

Courtesy of MERCEDES-BENZ USA

	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Remove/install
1	Remove corresponding door module and set down on a suitable base.		AR72.12-P-0103ME
2	Release catch tab (1).
3	Unhook bearing bracket (2) and door pin (8) from the left door lock of the rear door (A85/3) and right door lock of the rear door (A85/4).
4	Unhook wire (3) and remove grommets (4) from the door module.	Ensure that the grommets (4) are seated correctly.
5	Unhook wire of the power closing.	Model 167 with code 883 (Power closing)
6	Unhook wire (6).
7	Activate catch tabs (7) and remove left door lock of the rear door (A85/3) and right door lock of the rear door (A85/4) from door module (1).
8	Install in the reverse order.