Remove/Install Tablet Cradle - AR82.80-P-0001MEM
Model 167.9 With Code 224 (Individual rear seats) With Code M036 (Maybach version)
| Notice | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Connect diagnostic unit and read out data for takeover. | If the tablet cradle electric controller unit (A105/6) is replaced. | |
| AD00.00-P-2000-06ME | |||
| 2 | Switch off ignition and store transmitter key outside of transmitter range (min. 2 m). | ||
| 3 | Remove tablet PC (A105/7) from tablet cradle electric controller unit (A105/6). | ||
| 4 | Fold armrest (1) upward. | ||
| 5 | Remove covers (2) from underside of armrest (1). | ||
| 6 | Remove screw/bolts (3). | ||
| 7 | Lift tablet cradle electric controller unit (A105/6) until the electrical connector (4) on the underside is accessible. | ||
| 8 | Release and disconnect electrical connector (4) and remove tablet cradle electric controller unit (A105/6). | ||
| 9 | Install in the reverse order. | ||
| 10 | Commission tablet cradle electric controller unit (A105/6). | If the tablet cradle electric controller unit (A105/6) has been replaced. | |
| AD00.00-P-2000-06ME |