Remove/Install Loudspeaker In Instrument Panel - AR82.62-P-7833ME

Model 167 With Code 351 (eCall emergency call system) 

Model 167 With Code 360 (HERMES UMTS) 

Model 167 With Code 362 (HERMES communications module LTE) 

Model 167 With Code 364 (HERMES - UMTS communications module for Russia) 

Model 167 With Code 810 (Premium sound system) 

Model 167 With Code 811 (High-End sound system) 

Courtesy of MERCEDES-BENZ USA

Topical note	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Switch off ignition and store transmitter key outside of transmitter range (min. 2 m).
2	Unclip trim (1) starting at rear (arrows) all the way round and then remove toward rear out of instrument panel.
3	Lift center front mid-range speaker (Standard) (H20/22) or center front mid-range speaker (Premium) (H21/22) or center front mid-range speaker (High End) (H22/22) out of instrument panel until the electrical connector is accessible.	Do not crush or kink or subject lines to tension This will result in damage to the lines which may impair their functional capability. Coat elastomer bearing with lubricant. Ensure correct seating of the elastomer bearing. Lubricant, rubber assembly L	*BR00.45-Z-1010-06A
4	Release and disconnect electrical connectors at center front mid-range speaker (H20/22 or H21/22 or H22/22).
5	Install in the reverse order