LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2022 >> GLE580 >> Repair and Diagnosis >> Suspension >> Suspension Control Systems >> Suspension -- 167 Chassis >> Maintenance >> Damage Profiles For Shock Absorbers - AP32.00-P-3255-01A

Damage Profiles For Shock Absorbers - AP32.00-P-3255-01A

Model All 

Example shows shock absorber not OK (rubber joint bearing deformed/worn out) 

G12094904Courtesy of MERCEDES-BENZ USA

Example shows shock absorber not OK (rubber joint bearing porous/cracked) 

G12094905Courtesy of MERCEDES-BENZ USA

NOTES If the rubber joint bearing is deformed, worn out, porous or cracked, the shock absorber must be replaced subject to a separate repair order.

Damage can occur otherwise.

Example shows shock absorber OK (slight paint wear on reservoir tube (1)) 

G15043723Courtesy of MERCEDES-BENZ USA

Example shows shock absorber not OK (significant paint wear on reservoir tube (1)) 

G15043724Courtesy of MERCEDES-BENZ USA

IMPORTANT If the fastening points are out of alignment, the protective tube (2) can rub against the reservoir tube (1) of the shock absorber (shock absorber is under stress).

NOTES If the reservoir tube (1) has deformation, dents, corrosion, paint wear or other damage, the reservoir tube (1) or the entire shock absorber must be replaced subject to a separate repair order.

Damage can occur otherwise.

NOTES If the protective tube (2) has deformation, dents, corrosion, paint wear or other damage, the protective tube (2) or the entire shock absorber must be replaced subject to a separate repair order.

Damage can occur otherwise.

Example shows shock absorber OK

G15043725Courtesy of MERCEDES-BENZ USA

Example shows shock absorber OK (shock absorber pulled apart, dry in upper area (arrow)) 

G15043726Courtesy of MERCEDES-BENZ USA

Example shows shock absorber not OK (shiny, wet oil film on entire reservoir tube (1)) 

G15043727Courtesy of MERCEDES-BENZ USA