Remove/Install Engine Cover - AR01.10-P-2405MRK

Engine 264 In Model 167

G15031028

Courtesy of MERCEDES-BENZ USA

	Risk of injury caused by scraping or cutting body parts on sharp vehicle parts	Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels.	AS00.00-Z-0017-01A
	Remove/install
1	Release engine cover (1) and remove.	Release the elastomer bearings (2, 3, 4, 5) in numerical order. Otherwise, the engine cover (1) will be damaged. Wet the elastomer bearings (2, 3, 4, 5) with lubricant. Lubricant, rubber assembly 1 L	*BR00.45-Z-1010-06A
	Check
2	Check elastomer bearings (2, 3, 4, 5) for damage.	If damage is present, ↓ replace corresponding elastomer bearing (2, 3, 4, 5).
3	Install in the reverse order

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1010-06A	Lubricant, rubber assembly 1 L	A 000 989 03 67