169 589 02 63 00 Clamping Plates - WS32.00-P-0077B
Model 164, 166, 167, 169.0/3, 205, 206, 213, 232, 238, 245.20/23, 251, 253, 254, 257, 292, 295
Model 463.260/261/276/277/349
Use in FG 32/Set B
Purpose:
In Model 169, 232
Clamping plates for installing/removing the rear axle springs.
In Model 164, 251, 205, 206, 232, 254, 295, 463.260/261/276/277/349
Clamping plates for installing/removing the front axle springs.
Technical Note:
For model 463.260/261/276/277/349 only in combination with 203 589 01 31 00 Tensioning device.
Procurement information:
This workshop equipment can be ordered directly through the regular replacement part ordering process at the GLC/LC.