Remove/Install Rear Suspension Track/Tie Rod - AR35.20-P-0109ME

Model 167 

Shown With Code 490 (Electrohydraulic suspension) 

Fig 1: Rear Suspension Track/Tie Rod Components Location - Model 167 Shown With Code 490

Courtesy of MERCEDES-BENZ USA

Notice	Notes on self-locking nuts and bolts		AH00.00-P-0001-01KOA
Notice	Notes on threaded connections fastened using a tightening angle-based tightening process		AH00.00-P-0020-01A
	Notes on repair work on suspension components		AH00.00-P-0100-01A
	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Remove/install
1	Remove right or left rear wheel and tire assembly.		AR40.10-P-1102ME
2	Counterhold nut of bolt (2) and unscrew bolt (2).	Bolt, tie rod to wheel carrier	*BA35.20-P-1002-04O
3	Counterhold nut of cam bolt (3) and unscrew cam bolt (3).	Nut, tie rod to rear axle carrier	*BA35.20-P-1001-04O
4	Release pump unit of rear electrohydraulic suspension, lower, and remove cam bolt (3).	Model 167 with code 489 (AIRMATIC Dual Control/semi-active air suspension) with code 490 (Electrohydraulic suspension)	AR32.50-P-0048ME
5	Remove tie rod (1).
6	Install in the reverse order
	Finishing activity
7	Perform chassis alignment.		AR40.20-P-0200ME

TIE ROD

Number	Designation			Model 167
BA35.20-P-1001-04O	Nut, tie rod to rear axle carrier	M12	Nm	90

TIE ROD

Number	Designation				Model 167
BA35.20-P-1002-04O	Bolt, tie rod to wheel carrier	M12	Stage 1	Nm	80
			Stage 2	∠°	90