Remove/Install Center Rear Seat Belt Buckle - AR91.40-P-1527ME

Model 167.1/3 

Model 167.9 

except code 224 (Individual rear seats) 

Courtesy of MERCEDES-BENZ USA

Shown on model 167.1 except code 567 (Vario rear bench seat) 

Courtesy of MERCEDES-BENZ USA

Shown on model 167.1 With Code 567 (Vario rear bench seat) 

Notice	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Remove/install
1	Switch off ignition and store transmitter key outside of transmitter range (min. 2 m).
2.1	Remove seat cushion in rear passenger compartment at right.	Model 167.9 with code M036 (Maybach version) except code 224 (Individual rear seats)
			AR91.12-P-1021MEM
2.2	Remove center rear seat.	Model 167.1 with code 567 (Vario rear seat) Model 167.9 except code 224 (Individual rear seats) except code M036 (Maybach version)
			AR91.12-P-4026ME
2.3	Remove bench seat in rear passenger compartment.	Model 167.1 except code 567 (Vario rear seat) Model 167.3
			AR91.12-P-1021ME
3	Fold up shackles (5), drill out rivet (6) and remove trim (7) at seat frame base.	Model 167.1 with code 567 (Vario rear seat) Model 167.9 except code 224 (Individual rear seats) except code M036 (Maybach version)
4	Release and disconnect electrical connection (3).	Model 167.1/3 with code U01 (Rear belt status indicator) Model 167.9 with code U01 (Rear belt status indicator) except code 224 (Individual rear seats)
5.1	Remove screw (4) and remove right seat belt buckle (2) and center seat belt buckle (1).	Model 167.1 except code 567 (Vario rear seat) Model 167.3 Model 167.9 with code M036 (Maybach version) except code 224 (Individual rear seats)
		Note correct installation position of right seat belt buckle (2) and center seat belt buckle (1).
		The right seat belt buckle (2) and the center seat belt buckle (1) form a unit and must be removed or replaced together.
		Bolt/nut for rear belt buckle	*BA91.40-P-1009-01U
5.2	Remove screw (4) and remove center seat belt buckle (1).	Model 167.1 with code 567 (Vario rear seat) Model 167.9 except code 224 (Individual rear seats) except code M036 (Maybach version)
		Ensure that the center seat belt buckle (1) is installed in the correct position.
		Bolt/nut for rear belt buckle	*BA91.40-P-1009-01U
6	Install in the reverse order.