Remove/Install Additional Brake Lamp - AR82.10-P-5376ME

Model 167.1/9 

Fig 1: Additional/Center Brake Lamp Components Location - Model 167.1

Courtesy of MERCEDES-BENZ USA

	Risk of injury  caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.	No parts of the body or limbs should be within the operating area when the components are moving.	AS00.00-Z-0011-01A
	Notes on HANDS-FREE ACCESS		AH80.61-P-0001-01A
	Remove/install
1	Remove center rear spoiler.		AR72.20-P-4000ME
2	Unclip connection for washer fluid (2) from center rear spoiler.
3	Unclip electrical connector (3) from center rear spoiler and expose electrical wiring harness.
4	Remove bolts (1).
5	Unclip center brake lamp (E21) (arrows) remove.	Ensure that the center brake lamp (E21) is correctly seated.
6	Install in the reverse order.