000 588 34 21 00 Test And Measuring Case - WS14.00-P-0030B

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Engine All (4xWD, CAR, Heavy transporter, Light transporter, smart) Diesel engines with AdBlue® System

Use in FG 14/49/Set B

Purpose:

BLUETEC checking and measuring case for measuring the uric acid content in AdBlue®. Test equipment category CAT_A.

Procurement information:

This workshop appliance is not sold through the regular replacement part ordering process in GLC/LC, but instead directly through the manufacturer/supplier. Recommended workshop equipment and information about the manufacturers/supplier are available in the maintenance system document (see below).

Manufacturer 1

Autotestgerate Leitenberger GmbH

Bahnhofstraβe 33

72138 Kirchentellinsfurt

Germany

http://www.autotestgeraete.de/

Type/model: BLUETEC checking and measuring case Article no. AEKP 01

Courtesy of MERCEDES-BENZ USA

Manufacturer 2

KOCH-NAGY Labortechnische Systeme GmbH

Porschestrasse 9

70736 Fellbach-Oeffingen

Germany

http://www.koch-nagy.de

Type/model: BLUETEC checking and measuring case Article number: S-0124-U

Manufacturer 3

Mollenkopf GmbH

Hospitalstrasse 35

70174 Stuttgart

Germany

http://www.mollenkopf-stuttgart.de

Type/model: BLUETEC checking and measuring case Article number: M102000