Charge Air Pipe/Charge Air Cooling - BA09.41-P-1000-01FA
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Engine 139
CHARGE AIR PIPE/CHARGE AIR COOLING
| Number | Designation | Engine 139.5 | Engine 139.9 | ||
|---|---|---|---|---|---|
| BA09.41-P-1001-01FA | Screw, charge air pipe to chain case cover | Stage 1 | Nm | - | 4 |
| Stage 2 | ∠° | - | 90 | ||
| BA09.41-P-1002-01FA | Screw, charge air distributor to cylinder head/cylinder head cover | Nm | 11 | 11 | |
| BA09.41-P-1003-01FA | Charge air hose clamp to charge air cooler | Nm | - | 6 | |
| BA09.41-P-1004-01FA | Clamp, charge air hose to charge-air distributor | Nm | - | 6 | |
| BA09.41-P-1005-01FA | Clamp, charge air hose to turbocharger | Nm | - | 4 | |
| BA09.41-P-1006-01FA | Screw, cable bracket to charge air cooler | Nm | - | 8 | |
| BA09.41-P-1007-01FA | Screw, air intake connection to throttle valve actuator | Nm | 8 | 6 | |
| BA09.41-P-1008-01FA | Bolt, valve to charge air distributor | Nm | - | 8 | |
| BA09.41-P-1009-01FA | Bolt, pressure sensor to charge air cooler | Nm | - | 6 | |
| BA09.41-P-1010-01FA | Screw, charge air cooling expansion reservoir to holder | Nm | - | 8 | |
| BA09.41-P-1011-01FA | Bolt, coolant line on charge air cooler | Nm | 8 | 8 | |
| BA09.41-P-1012-01FA | Screw, water-cooled charge air cooler to holder/stud bolt | Nm | 8 | 8 | |
| BA09.41-P-1013-01FA | Screw, coolant line to charge-air distributor | Nm | - | 8 | |
| BA09.41-P-1014-01FA | Clamp, engine air intake duct to vent filter | Nm | - | 3 | |
| BA09.41-P-1015-01FA | Hexagon spacer bolts to charge air cooler and crankcase | Nm | - | 14 | |
| BA09.41-P-1016-01FA | Bolt, throttle valve actuator to charge air distributor | Nm | 8 | - | |
| BA09.41-P-1017-01FA | Clamp, charge air hose to exhaust gas turbocharger/charge air cooler/charge air pipe | Nm | 6 | - | |
| BA09.41-P-1018-01FA | Screw, charge air cooler holder to oil pan/holder/crankcase | Nm | 20 | - | |
| BA09.41-P-1019-01FA | Screw, holder for air filter housing to holder | Nm | 8 | - | |
| BA09.41-P-1020-01FA | Screw, coolant line to charge air cooler holder | Nm | 12 | - | |
| BA09.41-P-1021-01FA | Screw, coolant line to air intake fitting | Nm | 8 | - | |
| BA09.41-P-1022-01FA | Screw, air intake fitting to coolant expansion reservoir | Nm | 8 | - | |
| BA09.41-P-1023-01FA | Screw, vacuum line to air intake fitting | Nm | 8 | - |