Prepare Electronic Propeller Shaft Inclinometer - AR41.10-P-0086-02MFC
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 118, 177, 247
with code M005 (Vehicles with 4MATIC/all-wheel drive)
| |
|
|
 |
000 588 33 19 00 Inclinometer |
WS26.00-P-0416B |
Switch on inclinometer
- Switch on measuring instrument by pressing the ON button.
The version and the serial number are displayed for several seconds. Either the menu or the main menu will then appear, depending on which measuring instrument you are using.
Display message start
 Courtesy of MERCEDES-BENZ USA
|
Select measuring program 2 Press the STEP button.
- Press the STEP button.
Articulation angle measurement is selected. Display message menu
 Courtesy of MERCEDES-BENZ USA
|
Erase memory
The Erase memory function allows you to erase the memory before measuring an angle for the second time. However, this is not essential, as after the first angle has been stored, the angles from previous measurements are erased from the memory. The memory is likewise erased if the inclinometer is switched off in the meantime.
- Press the MEMORY button.
The values saved in the memory are displayed.
Display message main menu
 Courtesy of MERCEDES-BENZ USA
|
The values of the preceding articulation angle measurement are displayed.
- Press SAVE button.
Memory display message
 Courtesy of MERCEDES-BENZ USA
|
You are asked to confirm that you want to erase the memory before the values are actually deleted.
- Press the STEP button.
The memory is erased.
Display message query
 Courtesy of MERCEDES-BENZ USA
|
The confirmation that you want to erase the memory is displayed for a short time. The main menu then appears again.
Display message confirmation
 Courtesy of MERCEDES-BENZ USA
|