Risk Of Poisoning Caused By Swallowing The Tirefit Emulsion. Risk Of Injury Caused By Skin Contact And Eye Contact With The Tirefit Emulsion. Risk Of Fire Caused By Ignition Of The Tirefit Emulsion - AS40.10-Z-0001-01A
Model All (4xWD, CAR, Heavy transporter, Light transporter, smart)
Do not swallow or come into contact with the TIREFIT tire sealant, which is an emulsion of rubber and terpene phenolic resin. No open flames or open light sources.
Potential risks
Risk of poisoning caused by swallowing the emulsion of rubber and terpene phenolic resin.
Risk of injury caused by contact with skin and eyes. Especially sensitive individuals may experience allergic reactions following repeated contact.
Risk of fire caused by ignition of the emulsion due to open flames and open light sources.
Safety precautions/instructions
When using TIREFIT, ensure that smoking is prohibited and that there are no open flames in the vicinity.
When working with light sources, ensure that no open light sources are used in order to avoid ignition of the emulsion.
Use only the compressor supplied with the TIREFIT kit.
Avoid eye or skin contact with any TIREFIT emulsion that may escape.
Highly sensitive (allergic) individuals should wear protective clothing, such as protective work gloves.
Immediately change any clothing contaminated by TIREFIT.
Avoid ingesting the TIREFIT emulsion, always wash hands after working with the TIREFIT emulsion.
First aid measures
- If TIREFIT is swallowed, thoroughly rinse out mouth immediately and drink generous amounts of water.
Do not induce vomiting! Consult a physician immediately.
- In the event of skin or eye contact, rinse area with plenty of water.
Monitor development and consult physician immediately if allergic reactions occur.