General Notes: Passenger Cars: Complete Engine, Crankcase Ventilation, Cylinder Head, Crankcase - AH01.00-Z-9999AZ
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model All
| Notes on position of Engine number | MODEL 450.3/4, 452.3/4, 454.0 | AH01.00-P-0001-01FF | |
| Notes on position of Engine number | Engine 132.9, 660.9 in MODEL 451.3/4 | AH01.00-P-0001-01MCC | |
| Firing order | Engine 111, 601, 602 | AH01.00-Z-0100-01KDA | |
| Firing order | MODEL 415, 420, 470, 471, 907, 910... all with Engine 608 |
AH01.00-Z-0100-02KDP | |
| General information on inspecting cylinder walls | Engine 111, 122, 132, 134, 135, 160, 200, 260, 264, 266, 270, 271, 274, 276, 281, 602, 604, 605, 606, 607, 608, 611, 612, 613, 622, 626, 628, 629, 639, 640, 646, 647, 648, 651, 660, 699... | AH01.00-P-0300-01A | |
| General information on inspecting cylinder walls | Engine 133, 139, 156, 176, 177, 178, 254, 256, 276.8, 282, 654, 656 Engine 159 | AH01.00-P-0300-01AMG | |
| General information on inspecting cylinder walls | Engine 278 | AH01.00-P-0300-01MM | |
| General information on inspecting cylinder walls | Engine 642 | AH01.00-P-0300-01TD | |
| General information on inspecting cylinder walls | Engine 112, 113, 137, 152, 155, 157, 166, 272, 273, 275, 277, 279, 285 | AH01.00-P-0300-01VA | |
| General information on inspecting cylinder walls | Engine 111, 601, 611.981/987, 612.981, 647.981, 668 | AH01.00-Z-0300-01KOA | |
| Determine loss of pressure at cylinder | Engine all (4xWD, CAR, Heavy transporter, Light transporter, smart) | AH01.00-P-1300-02KOA | |
| Use of Engine no. when installing reconditioned Engines and factory-new replacement Engines or crankcases | Engine all (4xWD, CAR, Light transporter, smart) | AH01.10-P-0001-01A | |
| Use of unleaded fuel in reconditioned Engines | Engine 102, 110, 115, 116, 117... | AH01.10-P-1000-01A | |
| Bolt diagram cylinder head cover | Engine 120 | AH01.20-P-5014-04AO | |
| Notes on application of sealant to cylinder shutoff oil pump | Engine 137.970 | AH01.30-P-1000-01A | |
| Notes on application of sealant to front cover of the cylinder head | Engine 640 in MODEL 169, 245 | AH01.30-P-1000-02AL | |
| Notes on sealant path for front cover to cylinder head xxx | Engine 668.914/940/941/942 | AH01.30-P-1000-02A | |
| Notes on sealant path for front cover to cylinder head xxx | Engine 611, 612, 613, 628, 646, 647, 648... | AH01.30-P-1000-02B | |
| Notes on sealant path for front cover to cylinder head xxx | Engine 275, 277, 279, 285 | AH01.30-P-1000-02C | |
| Notes on sealant path for front cover to cylinder head xxx | Engine 152.9, 157, 176, 177, 178, 276, 278 | AH01.30-P-1000-02MM | |
| Notes on sealant path for front cover to cylinder head xxx | Engine 133 Engine 260 Engine 264 Engine 270 Engine 274 | AH01.30-P-1000-02MR | |
| Notes on sealant path for front cover to cylinder head xxx | Engine 629 | AH01.30-P-1000-02TJ | |
| Notes on sealant path for front cover to cylinder head xxx | Engine 272, 273 Engine 272.979 in model 906 | AH01.30-P-1000-02V | |
| Notes on application of sealing compound to rear cover at cylinder head | Engine 640 in model 169 Engine 668.914/940/941/942 | AH01.30-P-1000-03A | |
| Information on applying sealant to cylinder head gasket | Engine 113 Engine 272, 273 | AH01.30-P-1000-04RX | |
| Information on applying sealant to cylinder head gasket | Engine 112.951/976, 646 Engine 112 | AH01.30-P-1000-04VA | |
| Information on cylinder head contact surface | Engine 112/951/976, 113, 646 | AH01.30-P-1000-05A | |
| Notes on assigning the cylinder head gaskets | Engine 642 in model 461, 463 Engine 642 in model 639 Engine 642 | AH01.30-P-1000-06TI | |
| Notes on assigning the cylinder head gaskets | Engine 112 Engine 113 | AH01.30-P-1000-06V | |
| Notes on sealant path for cylinder head cover | Engine 133, 139, 152, 157, 159, 176, 177, 200, 260, 264, 270, 272, 273, 274, 276, 278, 282... | AH01.30-P-1000-08MM | |
| Notes on sealant path for cylinder head cover | Engine 622, 626, 642... | AH01.30-Z-1000-08KSE | |
| Notes on sealant path for cylinder head cover | Engine 122, 200, 266, 272, 699... | AH01.30-Z-1000-08KUS | |
| Notes on sealant path for timing case cover | Engine 137.970 | AH01.40-P-1000-01A | |
| Notes on sealant path for timing case cover | Engine 156 | AH01.40-P-1000-01AMG | |
| Notes on sealant path for timing case cover | Engine 112, 113 Engine 112.951/976 in model 639.601/603/605/701/703/705/711/713/811/813/815 | AH01.40-P-1000-01B | |
| Notes on sealant path for timing case cover | Engine 275, 277, 279 | AH01.40-P-1000-01C | |
| Notes on sealant path for timing case cover | Engine 651 in model 447, 636, 639 Engine 651 in model 900, 906, 907 Engine 651, 654, 656 | AH01.40-P-1000-01CD | |
| Notes on sealant path for timing case cover | Engine 611, 612, 613, 646, 647, 648... | AH01.40-P-1000-01E | |
| Notes on sealant path for timing case cover | Engine 639.939 in MODEL 454.0 | AH01.40-P-1000-01FG | |
| Notes on sealant path for timing case cover | Engine 132.9 in MODEL 451.3/4 | AH01.40-P-1000-01MCC | |
| Notes on sealant path for timing case cover | Engine 660.9 in MODEL 451.3/4 | AH01.40-P-1000-01MCD | |
| Notes on sealant path for timing case cover | Engine 260 | AH01.40-P-1000-01MFC | |
| Notes on sealant path for timing case cover | Engine 200.731, 282 | AH01.40-P-1000-01MFD | |
| Notes on sealant path for timing case cover | Engine 276 | AH01.40-P-1000-01MMA | |
| Notes on sealant path for timing case cover | Engine 152.9, 157, 278 | AH01.40-P-1000-01MMB | |
| Notes on sealant path for timing case cover | Engine 274 | AH01.40-P-1000-01MR | |
| Notes on sealant path for timing case cover | Engine 264 | AH01.40-P-1000-01MRH | |
| Notes on sealant path for timing case cover | Engine 254.9, 256 | AH01.40-P-1000-01MRT | |
| Notes on sealant path for timing case cover | Engine 133 Engine 139 Engine 270 | AH01.40-P-1000-01MT | |
| Notes on sealant path for timing case cover | Engine 622, 626 | AH01.40-P-1000-01OLP | |
| Notes on sealant path for timing case cover | Engine 281 | AH01.40-P-1000-01SR | |
| Notes on sealant path for timing case cover | Engine 271 Engine 271.951 in MODEL 906 | AH01.40-P-1000-01TK | |
| Notes on sealant path for timing case cover | Engine 272, 273 | AH01.40-P-1000-01VA | |
| Notes on sealant path for timing case cover | Engine 642... | AH01.40-Z-1000-01KSE | |
| Notes on application of sealant to right-hand crankcase | Engine 137.970 | AH01.40-P-1000-02A | |
| Information on application of sealant to crankcase bottom section | Engine 137.970, 156, 159, 275, 277, 279, 281, 285, 628, 629 | AH01.40-P-1000-03TJ | |
| Information on application of sealant to end cover of crankcase | Engine 137, 275, 279, 629, 651... | AH01.40-Z-1000-04KWE | |
| Notes on application of sealant to crankcase cover | Engine 137.970 | AH01.40-P-1000-05A | |
| Notes on application of sealant to end cover with radial shaft seal | Engine 112, 113, 646... | AH01.40-P-1000-06A | |
| Notes on sealant path for cylinder crankcase | Engine 152.9, 157, 276, 278 | AH01.40-P-1000-08MM | |
| Notes on distribution of sealant on crankcase end cover | Engine 176 in model 167, 217, 222, 223 Engine 176 in model 463 Engine 177 Engine 178 in model 190 | AH01.40-P-1000-09MNA | |
| Notes on applying sealant to bottom part of crankcase | Engine 254.9 Engine 654 | AH01.40-P-1001-01OLC | |
| Notes on sealant path for oil pan | Engine 156... | AH01.45-P-0001-01AMG | |
| Notes on sealant path for oil pan | Engine 112, 113, 137, 176, 177, 275, 277, 279, 628... | AH01.45-P-0001-01C | |
| Notes on sealant path for oil pan | Engine 112, 113, 166, 266, 271, 629, 646, 651, 668... | AH01.45-P-0001-01CD | |
| Notes on sealant path for oil pan | Engine 122.9 in model 454.0 Engine 281 | AH01.45-P-0001-01FB | |
| Notes on sealant path for oil pan | Engine 133, 152, 157, 176, 177, 256, 260, 264, 270, 274, 276, 278, 282... | AH01.45-P-0001-01MMA | |
| Notes on sealant path for oil pan | Engine 607 Engine 608 Engine 642 Engine 651 in model 117, 156, 176, 246 Engine 656 | AH01.45-P-0001-01OM | |
| Notes on sealant path for oil pan | Engine 156 in model 230.470 | AH01.45-P-0001-01RMG | |
| Notes on sealant path for oil pan | Engine 272 Engine 273 | AH01.45-P-0001-01VA |