Remove/Install Parktronic System (PTS) Sensors In Rear Bumper - AR54.65-P-0002MFA
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 118, 247
with code 235 (Parking Pilot with PARKTRONIC)
Model 177
with code 235 (Active Parking Assist with PARKTRONIC)
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Remove rear bumper (1) | AR88.20-P-2200MFA | |
| 2 | Release and disconnect electrical connectors (2) | ||
| 3 | Pull locks (3) lightly outwards and remove rear parking system distance sensors (B8/7, B8/8, B8/9, B8/10, B8/11, B8/12) from bumper (1) | ||
| Check | |||
| 4 | Check respective seal of rear parking system distance sensors (B8/7, B8/8, B8/9, B8/10, B8/11, B8/12). | In the event of complaints ↓ Replace corresponding seal. |
|
| 5 | Install in the reverse order |