Remove/Install Front Side Air Vent - AR83.10-P-4741MFA

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model 118, 177, 243, 247

Shown on model 177

Courtesy of MERCEDES-BENZ USA

Notice	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Hook extraction hooks into the openings (3) inside the side air vent (1) and remove side air vent (1) carefully.	Do not crush or kink or subject electric lines to tension. This will result in damage to the electric lines and can impair their function. Make sure that the marking "TOP" on the side air vent (1) is pointing upward. Extraction hook	Fig 1
2	Release and disconnect electrical connector and remove side air vent (1).	Model 118, 177, 243, 247 with code 877 (Ambient lighting)
	Check
3	Check spring clips (2) for damage.	If damage is detected, ↓ replace affected side air vent (1).
4	Install in the reverse order.

Fig 1: Identifying Extraction Hook (140 589 02 33 00)

Courtesy of MERCEDES-BENZ USA