Bleed Brake System - AR42.10-P-0010FR

Model 257 

Model 290 

Courtesy of MERCEDES-BENZ USA

Shown on model 257 

	Risk of poisoning  from swallowing Brake fluid. Risk of injury  from skin and eye contact with Brake fluid	Only pour Brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling Brake fluid.	AS42.50-Z-0001-01A
Topical note	Notes on repairs to Brake system		AH42.00-P-0003-01A
Topical note	Notes on handling, transport and storage of composite Brake disks		AH42.10-P-9406-12LF
Topical note	Brake fluid notes		AH42.50-P-0001-01A
Topical note	Notes on handling, transport and storage of		AH42.10-P-9406-13A
	ceramic Brake disks
	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Remove
1	Remove cover (1) above Brake fluid reservoir (2).
2	Clean area around cap of Brake fluid reservoir (2).	Assembly cleaner	*BR00.45-Z-1028-04A
3	Unscrew cap of Brake fluid reservoir (2).
	Bleeding
4	Fill Brake fluid reservoir (2) with new Brake fluid up to maximum mark.
	Brake fluids (DOT 4 plus)		BB00.40-P-0331-00A
	General Brake fluid		BB00.40-P-0330-01A
5	Connect filling unit to Brake fluid reservoir (2).
	000 588 01 82 00 Filling unit		WS25.00-P-0016B
	Brake fluids (DOT 4 plus)		BB00.40-P-0331-00A
	General Brake fluid		BB00.40-P-0330-01A
		Observe manufacturer's operating instructions.
6	Switch on filling unit.
7	Raise vehicle.		AR00.60-P-1006A
8	Bleed the system.		AR42.10-P-0010-02FR
	000 588 01 82 00 Filling unit		WS25.00-P-0016B
		Model 290 Bleed screw at Brake caliper	*BA42.10-P-1003-10BA
		Bleed screw to Brake caliper	*BA42.10-P-1002-12W
		Model 257 Bleed screw at Brake caliper	*BA42.10-P-1003-10X
9	Switch off filling unit and disconnect from Brake fluid reservoir (2).
10	Check Brake system for leaks.		AR42.10-P-0100-01FR
11	Correct fluid level in Brake fluid reservoir (2).
			AP42.10-P-4210B
	Install
12	Seal Brake fluid reservoir (2) with cap.
13	Install cover (1) over Brake fluid reservoir (2).
14	Lower vehicle.		AR00.60-P-1006A