Protect Repair Area After Cable Repairs - Ar00.19-D-0100-08A

AR00.19-D-0100-08A	Protect repair area after cable repairs
	Risk of injury  caused by burns to skin and eyes. Risk of poisoning  caused by inhaling fumes when working with heat-shrinkable tubing.	Work in well ventilated rooms only. Wear safety glasses with side protection and protective gloves.	AS00.19-Z-0001-01A

MODEL ALL 

1. Slide heat-shrinkable tube over the repair area.
2. Heat the heat-shrinkable tube using hot air blower until it lies evenly against the repair area.

   Protection of repair area with heat-shrinkable tube 

3. Lay corrugated hose over repair point.
4. Wrap insulation tape around corrugated hose at both ends.

   Protection of repair point by corrugated hose 

5. Wrap duct tape around repair point to match the original condition.

   Duct tape is used for visual harmonization of the repair point and to protect against chafing. In vehicle areas with higher loads (e.g. engine compartment), duct tape should only be used in combination with other (watertight) safety precautions.

   Repair point protection through wrapping with duct tape