Use Of Gloss Preserver - AP98.00-S-0641S

Model 907 

	Application
1	Wash and dry vehicle.	Car Wash	*BR00.45-Z-1002-04A
Do not perform these jobs in direct sunlight or when the engine hood is hot. Otherwise serious paint damage may occur.
3	Rub gloss preserver into the surface of the paintwork
		Observe notes on proper care and polishing of MB vehicle paintwork. Apply gloss preserver onto a clean polishing wad or a clean polishing cloth and rub in evenly to produce a thin unbroken film. Shake gloss preserver cans vigorously before use. The gloss preserver acts as a protection against weathering and preserves the existing luster. Depending on the weathering involved repeat treatment every 3 to 6 months.
		Polishing wad	*BR00.45-Z-1043-04A
		Polishing cloth	*BR00.45-Z-1044-04A
		Gloss preservation, 500 ml, DB supply specification 7551.10	*BR00.45-Z-1014-04A
4	Remove excess gloss preserver	Excess gloss preserver forms a white film after it dries, this should then be buffed using a clean polishing wad until the paint surface is clear.

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1002-04A	Car Wash	A 001 986 41 71
BR00.45-Z-1014-04A	Gloss preservation, 500 ml, DB supply specification 7551.10	A 000 986 44 74
BR00.45-Z-1020-04A	Tar remover	A 001 986 40 71
BR00.45-Z-1021-04A	Insect remover	A 001 986 39 71
BR00.45-Z-1043-04A	Polishing wad	A 000 986 02 62
BR00.45-Z-1044-04A	Polishing cloth	A 000 986 04 62