Assess Condition Of Brake Linings - AP42.10-D-4252TS

Model 907

G13787511

Example

	Risk of death caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
	Risk of injury . Skin or eye injuries may result when handling hot or glowing objects.	Wear protective gloves, protective clothing and safety glasses, if necessary.	AS00.00-Z-0002-01A
	Special instructions for lifting and supporting vehicle		AH00.60-N-0100-01TS
	Check
1	Lift vehicle with lifting platform.
			AR00.60-D-1000-04TS
2	Check brakepad thickness (1) on front axle through opening on the wheel disk and from the vehicle underside.	If necessary, use a flashlight (2) or a mirror (3). Brake lining wear limit If it is not possible to check through the opening on the wheel disk or from the vehicle underside. ↓ Remove wheels and perform check. After obtaining special order. If the wear limit of the brakepads is reached or exceeded. ↓ Replace brakepads of front axle.	*BE42.10-N-1001-10A
		After obtaining special order.	AR42.10-D-1610TS
3	Check brakepad thickness (1) on rear axle through opening on the wheel disk and from the vehicle underside.	If necessary, use a flashlight (2) or a mirror (3). Brake lining wear limit If it is not possible to check through the opening on the wheel disk or from the vehicle underside. ↓ Remove wheels and perform check. After obtaining special order.	*BE42.10-N-1001-10A
		If the wear limit of the brakepads is reached or exceeded. ↓ Replace brakepads of rear axle.
		After obtaining special order.	AR42.10-D-1710TS
4	Lower vehicle with vehicle lift.

TEST AND ADJUSTMENT VALUES FOR SERVICE BRAKE

Number	Designation		Model 907
BE42.10-N-1001-10A	Brake lining wear limit	mm	3