Signal List, Caravan Control Unit, Satellite System, Function - GF54.21-D-5054TSA
Model 907
with code JA3 (Intelligent body control.)
SIGNAL LIST FOR SATELLITE SYSTEM LIN CONNECTIONS
| Signal ID | Signal type/number | Signal: Name/function | Parameter | |
|---|---|---|---|---|
| Byte | Bit | |||
| 034h | 1 | 0 | Name: SAT_STAT_AR Function: SAT STAT AR |
File type: 08_SAT_Status Value/name/function: 0/UNKNOWN/The status of the antenna is unknown 1/INIT/Antenna is initializing 3/PARKING_DOWN/Antenna is closing the dish 3/PARKING_ENGINE/Antenna is closing the dish and the motorhome engine is on 4/SELECTING/The satellite SatNum has been selected 5/SATFOUND/Antenna has successfully found satellite SatNum 6/SEARCHING/Antenna is searching the satellite SatNum 7/SAT_NOTFOUND/Antenna couldn't find satellite SatNum 8/ERRMOTORAZ/Error in azimuth motor: FORCE OFF command is required (see Control Frame 0x2F) 9/ERRMOTOREL/Error in elevation motor: FORCE OFF command is required (see Control Frame 0x2F) 10/ERROR/Antenna Error, ErrorCode: FORCE OFF command is required (see Control Frame 0x2F) 11/PARKED_DOWN/Antenna has completed the dish closing 12/PARKED ENGINE/-13/MANUAL_ADJUST/-255/OFF/Antenna is powered OFF |
| 2 | 0 | Name: SAT_Param1_Rs_AR Function: SAT Param 1 Rs AR |
File type: 08_SAT_PARAM | |
| 3 | 0 | Name: SAT_Param2_Rs_AR Function: SAT Param 2 Rs AR |
File type: 08_SAT_PARAM | |
| 4 | 0 | Name: SAT_Param3_Rs_AR Function: SAT Param 3 Rs AR |
File type: 08_SAT_PARAM | |
| 5 | 0 | Name: SAT_Param4_Rs_AR Function: SAT Param 4 Rs AR |
File type: 08_SAT_PARAM | |
| 6 | 0 | Name: SAT_Param5_Rs_AR Function: SAT Param 5 Rs AR |
File type: 08_SAT_PARAM | |
| 7 | 0 | Name: SAT_Param6_Rs_AR Function: SAT Param 6 Rs AR |
File type: 08_SAT_PARAM | |
| 8 | 0 | Name: SAT_Param7_Rs_AR Function: SAT Param 7 Rs AR |
File type: 07_Alde_ACLightLevel | |
| 8 | 7 | Name: RsErr_SAT Function: Response error |
File type: DC_BOOL | |
| 03DH | 1 | 0 | Name: SlaveRespB0 | Value: 25 |
| 2 | 0 | Name: SlaveRespB1 | - | |
| 3 | 0 | Name: SlaveRespB2 | - | |
| 4 | 0 | Name: SlaveRespB3 | - | |
| 5 | 0 | Name: SlaveRespB4 | - | |
| 6 | 0 | Name: SlaveRespB5 | - | |
| 7 | 0 | Name: SlaveRespB6 | - | |
| 8 | 0 | Name: SlaveRespB7 | - | |
SIGNAL LIST FOR SATELLITE SYSTEM LIN CONNECTIONS
| Signal ID | Signal type/number | Signal: Name/function | Parameter | |
|---|---|---|---|---|
| Byte | Bit | |||
| 02FH | 1 | 0 | Name: SAT_CMD_AR Function: SAT CMD AR |
File type: 08_SAT_CMD Value/name/function: 16/CLOSE/Close the dish. After closing the dish the system will automatically power off. 17/SAT/Antenna powered off: the system will automatically power on and start searching the last satellite found. Antenna already powered on: selects the next satellite in the list and starts searching. From the last satellite the selection will roll back to the first satellite of the list 18/FORCE_OFF/Force the system to power off. To use when the antenna status is ERRORAZ, ERROREL or ERROR (see Info Frame 0x34) |
| 2 | Name: SAT_Param1_Rq_AR Function: SAT Param 1 Rq AR |
File type: 08_SAT_PARAM | ||
| 3 | 0 | Name: SAT_Param1_Rq_AR Function: SAT Param 1 Rq AR |
File type: 08_SAT_PARAM | |
| 4 | 0 | Name: SAT_Param3_Rq_AR Function: SAT Param 3 Rq AR |
File type: 08_SAT_PARAM | |
| 5 | 0 | Name: SAT_Param4_Rq_AR Function: SAT Param 4 Rq AR |
File type: 08_SAT_PARAM | |
| 6 | 0 | Name: SAT_Param5_Rq_AR Function: SAT Param 5 Rq AR |
File type: 08_SAT_PARAM | |
| 7 | 0 | Name: SAT_Param6_Rq_AR Function: SAT Param 6 Rq AR |
File type: 08_SAT_PARAM | |
| 8 | 0 | Name: SAT_Param7_Rq_AR Function: SAT Param 7 Rq AR |
File type: 08_SAT_PARAM | |