Caravan Control Unit Light Control, Function - GF54.21-D-5037TSA

Model 907 

with code JA3 (Intelligent body control.) 

General 

The control is a basic function of the MB Advanced Control control unit (N175).

The MBAC can control two light circuits:

• White light circuit
• RGB light circuit

Pulse width modulation (PWM)

White light circuit 

The MBAC can set the brightness of a dimmable light source between 0 % and 100% with a resolution of 0.1 %. To do so, a light source must be connected to the "DO_PWM_White1_Dimmer" interface of the MBAC and be controllable.

The MBAC enables the user to set the brightness of a dimmable light between 0 % and 100 % with a resolution of 0.1 %. To do so, a light source must be connected to the "DO_PWM_White1_Dimmer" interface of the MBAC and be controllable.

The MBAC enables the user to set the status of a dimmable light source (switched on or off) using the pushbutton switch. To do so, a light source must be connected to the "DO_PWM_White1_Dimmer" interface of the MBAC and be controllable, and a pushbutton switch must be connected to the "DI_Light_Circuit_White1_Pushbutton_Switch" interface and be controllable.

The MBAC can set the brightness of a dimmable light source between 0 % and 100% with a resolution of 0.1 %. To do so, a light source must be connected to the "DO_PWM_White2_Dimmer" interface of the MBAC and be controllable.

The MBAC enables the user to set the brightness of a dimmable light between 0 % and 100 % with a resolution of 0.1 %. To do so, a light source must be connected to the "DO_PWM_White2_Dimmer" interface of the MBAC and be controllable.

The MBAC enables the user to set the status of a dimmable light source (switched on or off) using the pushbutton switch. To do so, a light source must be connected to the "DO_PWM_White2_Dimmer" interface of the MBAC and be controllable, and a pushbutton switch must be connected to the "DI_Light_Circuit_White2_Pushbutton_Switch" interface and be controllable.

The MBAC can set the brightness of a dimmable light source between 0 % and 100% with a resolution of 0.1 %. To do so, a light source must be connected to the "DO_PWM_White3_Dimmer" interface of the MBAC and be controllable.

The MBAC enables the user to set the brightness of a dimmable light between 0 % and 100 % with a resolution of 0.1 %. To do so, a light source must be connected to the "DO_PWM_White3_Dimmer" interface of the MBAC and be controllable.

The MBAC enables the user to set the status of a dimmable light source (switched on or off) using the pushbutton switch. To do so, a light source must be connected to the "DO_PWM_White3_Dimmer" interface of the MBAC and be controllable, and a pushbutton switch must be connected to the "DI_Light_Circuit_White3_Pushbutton_Switch" interface and be controllable.

RGB light circuit 

The MBAC can set the intensity of the red color channel of the light source between 0 % and 100% with a resolution of 0.1 %. To do so, a light source must be connected to the "DO_PWM_RGB_RGB_Red" interface and the red color channel of the light source must be controlled separately.

The MBAC enables the user to set the intensity of the red color channel of the light source between 0 % and 100 % with a resolution of at least 0.1 %. To do so, a light source must be connected to the "DO_PWM_RGB_RGB_Red" interface and the red color channel of the light source must be controlled separately.

The MBAC can set the intensity of the green color channel of the light source between 0 % und 100 % with a resolution of at least 0.1 %. To do so, a light source must be connected to the "DO_PWM_RGB_RGB_Green" interface and the green color channel of the light source must be controlled separately.

The MBAC enables the user to adjust the intensity of the green color channel of the light source between 0 % and 100 % with a resolution of at least 0.1 %. To do so, a light source must be connected to the "DO_PWM_RGB_RGB_Green" interface and the green color channel of the light source must be controlled separately.

The MBAC can set the intensity of the blue color channel of the light source between 0 % und 100 % with a resolution of at least 0.1 %. To do so, a light source must be connected to the "DO_PWM_RGB_RGB_Blue" interface and the blue color channel of the light source must be controlled separately.

The MBAC enables the user to set the intensity of the blue color channel of the light source between 0 % and 100 % with a resolution of at least 0.1 %. To do so, a light source must be connected to the "DO_PWM_RGB_RGB_Blue" interface and the blue color channel of the light source must be controlled separately.

Caravan control unit light status, function	GF54.21-D-5038TSA
Overview of system components of caravan control unit	GF54.21-D-9992TSA