Signal List, Caravan Control Unit, Wake-Up, Function - GF54.21-D-5075TSA

Model 907

with code JA3 (Intelligent body control.)

SIGNAL LIST FOR WAKE-UP CAN CONNECTIONS

Signal ID	Signal type/number		Signal: Name/function	File type	Value/name	Function
	Byte	Bit
500h	1	0	-	-	-	-
	2	0	-	-	-	-
	3	0	Name: WakeupRsn_GW Function: Wake-up reason gateway	08_WakeupRsn_GW	0/NETWORK_ACU_CAN	Wake-up by CAN for MBAC
					1/NETWORK_ABH_CAN	Wake-up by CAN for body manufacturer
					2/BT	Wake-up by component part
					3/DISP_KEY	Wake-up by display switch
					4/IO	Wake-up by IO
	4	0	Name: Awake_Diag_Actv Function: Keep awake for diagnosis active	DC_BOOL	-	-
	4	1	Name: Awake_ABHCAN_Actv Function: Wake-up by CAN for body manufacturer active	DC_BOOL	-	-
	4	2	Name: Awake_ExternalPower_Actv Function: Wake-up by external power supply active	DC_BOOL	-	-
	4	3	Name: Awake_BT_Actv Function: Wake-up by component part active	DC_BOOL	-	-
	4	4	Name: Awake_Reardisplay_Actv Function: Wake-up by rear display active	DC_BOOL	-	-
	4	5	Name: Awake_IO_Actv Function: Wake-up by IO active	DC_BOOL	-	-
	4	6	Name: Awa ke_cyclic_Actv Function: Awake cyclic active	DC_BOOL	-	-
	4	7	Name: Awake_NwSt Function: Keep awake for network start phase	DC_BOOL	-	-
	5	0	-	-	-	-
	6	0	-	-	-	-
	7	0	-	-	-	-
	8	0	-	-	-	-
510h	1	0	-	-	-	-
	2	0	-	-	-	-
	3	0	Name: WakeupRsn_IO0 Function: Wake-up reason IO0	08_WakeupRsn_IO0	0/NETWORK_ACU_CAN	Wake-up by CAN for MBAC
					4/IO	Wake-up by IO
	4	0	Name: Awake_Diag_Actv Function: Wake-up for diagnosis active	DC_BOOL	-	-
	4	1	Name: Awake_IO_Actv Function: Wake-up by IO active	DC_BOOL	-	-
	4	2	-	-	-	-
	4	7	Name: Awake_NwSt Function: Keep awake for network start phase	DC_BOOL	-	-
	5	0	-	-	-	-
	6	0	-	-	-	-
	7	0	-	-	-	-
	8	0	-	-	-	-
511h	1	0	-	-	-	-
	2	0	-	-	-	-
	3	0	Name: WakeupRsn_IO1 Function: Wake-up reason IO0	08_WakeupRsn_IO0	0/NETWORK_ACU_CAN	Wake-up by CAN for MBAC
					4/IO	Wake-up by IO
	4	0	Name: Awake_Diag_Actv Function: Keep awake for diagnosis active	DC_BOOL	-	-
	4	1	Name: Awake_IO_Actv Function: Wake-up by IO active	DC_BOOL	-	-
	4	7	Name: Awake_NwSt Function: Keep awake for network start phase	DC_BOOL	-	-
	5	0	-	-	-	-
	6	0	-	-	-	-
	7	0	-	-	-	-
	8	0	-	-	-	-
512h	1	0	-	-	-	-
	2	0	-	-	-	-
	3	0	Name: WakeupRsn_IO2 Function: Wake-up reason IO2	08_WakeupRsn_IO2	0/NETWORK_ACU_CAN	Wake-up by CAN for MBAC
					4/IO	Wake-up by IO
	4	0	Name: Awake_Diag_Actv Function: Keep awake for diagnosis active	DC_BOOL	-	-
	4	1	Name: Awake_IO_Actv Function: Wake-up by IO active	DC_BOOL	-	-
	4	7	Name: Awake_NwSt Function: Keep awake for network start phase	DC_BOOL	-	-
	5	0	-	-	-	-
	6	0	-	-	-	-
	7	0	-	-	-	-
	8	0	-	-	-	-
53BH	1	0	-	-	-	-
	2	0	-	-	-	-
	3	0	Name: WakeupRsn_DISP_C Function: Wake-up reason display	08_WakeupRsn_DISP_C	0/NETWORK	Wake-up by network
					167/OPN_DISP	Wake-up by display open (not 221/216)
	4	0	Name: Awake_Diag_Actv Function: Keep awake for diagnosis active	DC_BOOL	-	-
	4	1	Name: Awake_Ignition_On Function: Keep awake for ignition switched on	DC_BOOL	-	-
	4	2	Name: Awake_Disp_C_On_Rq Function: Keep awake for display switched on	DC_BOOL	-	-
	4	3	-	-	-	-
	4	7	Name: Awake_NwSt Function: Keep awake for network start phase	DC_BOOL	-	-
	5	0	-	-	-	-
	6	0	-	-	-	-
	7	0	-	-	-	-
	8	0	-	-	-	-