Remove/Install Parking Brake Indicator Switch - Ar42.20-D-0501TS

Model 907

except code B25 (Electric parking brake)

G13787477

	Risk of injury caused by scraping or cutting body parts on sharp vehicle parts	Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels.	AS00.00-Z-0017-01A
	Notes on carrying out repair work in the vehicle interior		AH68.00-N-0001-01S
	Remove/install
1	Remove trim (1).	To do so, detach trim (1) at top toward rear and unclip in the center.
2	Disconnect electrical connectors (2).
3	Remove switch (4).	Remove screw (3) to do this. M6	*BA00.10-N-1002-01A
4	Install in the reverse order
	Check
5	Perform function test of switch (4).

TORQUE SPECIFICATION

HEADLESS SCREWS/BOLTS: SCREWS/BOLTS AND NUTS, COARSE-PITCH THREAD

Number	Designation			8.8	10.9
BA00.10-N-1002-01A	M6	Galvanized	Nm	9	13
		Phosphated	Nm	9	12

TORQUE SPECIFICATION

HEADLESS SCREWS/BOLTS: SCREWS/BOLTS AND NUTS, COARSE-PITCH THREAD

Number	Designation			12.9
BA00.10-N-1002-01A	M6	Galvanized	Nm	16
		Phosphated	Nm	14