Detach/Attach Rear Brake Cables On Brake COMPENSATOR Lever - Ar42.20-D-0520-06TS
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | AS00.00-Z-0010-01A |
Model 907
except code B25 (Electric parking brake)
- Loosen the jam nut (33).
- Release adjusting nut (30) far enough until spring is relieved of load.
- Remove brake cables (4) from holder (32).
- Install in the reverse order.