Caravan Control Unit Services For Additional Equipment, Function - GF54.21-D-5013TSA
Model 907
with code JA3 (Intelligent body control.)
Appicals services
The appicals devices are virtual additional devices that can display the MB Advanced Control control unit (N175) on the output devices.
Appicals services (services for additional devices) are a basic function of MBAC. The MBAC contains the following appicals services:
- RGB output
- Actuator output
- Sensor input
- Digital output
- Relative output
- State output
- Relative input
- Digital input
RGB output
The MBAC can perform the appicals I/O service RGB output for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service RGB output.
The MBAC can read out the value "Actv" (TRUE or FALSE) for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service RGB output.
The MBAC can set the value "Actv" (TRUE or FALSE) for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service RGB output.
The MBAC can read out the value "Red" in the range from 0 to 255 with an accuracy of 1 for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service RGB output.
The MBAC can set the value "Red" in the range from 0 to 255 for each virtual appical device with an accuracy of 1. To do so, the appicals device of the MBAC must have the appicals I/O service RGB output.
The MBAC can read out the value "Green" in the range from 0 to 255 with an accuracy of 1 for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service RGB output.
The MBAC can set the value "Green" in the range from 0 to 255 with an accuracy of 1 for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service RGB output.
The MBAC can read out the value "Blue" in the range from 0 to 255 with an accuracy of 1 for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service RGB output.
The MBAC can set the value "Blue" in the range from 0 to 255 with an accuracy of 1 for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service RGB output.
Actuator output
The MBAC can perform the appicals I/O service actuator output for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service actuator output.
The MBAC can read out the value "Actv" (TRUE or FALSE) for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service actuator output.
The MBAC can set the value "Actv" (TRUE or FALSE) for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service actuator output.
The MBAC can set the variable unit for each virtual appical device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service actuator output.
The MBAC can set the variable type for each virtual appical device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service actuator output.
The MBAC can set the "MinLimit" value for each virtual appicals device for the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service actuator output.
The MBAC can read out the "MinLimit" value for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service actuator output.
The MBAC can set the "MaxLimit" value for each virtual appicals device for the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service actuator output.
The MBAC can read out the "MaxLimit" value for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service actuator output.
The MBAC can set the "Trgt" value for each virtual appicals device for the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service actuator output.
The MBAC can read out the "Trgt" value for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service actuator output.
The MBAC can set the "Current" value for each virtual appical device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service actuator output.
The MBAC can read out the "Current" value for each virtual appical device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service actuator output.
Sensor input
The MBAC can perform the Appicals I/O service sensor input for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service sensor output.
The MBAC can set the variable unit for each virtual appical device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service sensor output.
The MBAC can set the variable type for each virtual appical device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service sensor output.
The MBAC can set "Value" as a value for each virtual appical device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service sensor output.
The MBAC can read out "Value" as a value for each virtual appical device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service sensor output.
The MBAC can set the "MinLimit" value for each virtual appicals device for the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service sensor output.
The MBAC can read out the "MinLimit" value for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service sensor output.
The MBAC can set the "MaxLimit" value for each virtual appicals device for the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service sensor output.
The MBAC can read out the "MaxLimit" value for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service sensor output.
Digital output
The MBAC can perform the appicals-I/O service digital output for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service digital output.
The MBAC can read out the value "State" (TRUE or FALSE) for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service digital output.
The MBAC can set the value "State" (TRUE or FALSE) for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service digital output.
Relative output
The MBAC can perform the appicals-I/O service relative output for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service relative output.
The MBAC can read out the value "Actv" (TRUE or FALSE) for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service relative output.
The MBAC can set the value "Actv" (TRUE or FALSE) for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service relative output.
The MBAC can read out "Val" as a value in the range from 0 to 1000 with an accuracy of 1 for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service relative output.
The MBAC can set "Val" as a value in the range from 0 to 1000 with an accuracy of 1 for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service relative output.
State output
The MBAC can perform the appicals-I/O service state output for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service state output.
The MBAC can set the "Res" value as a string for each virtual appicals device for the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service state output.
The MBAC can read out the "Res" value as a string for each virtual appicals device for the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service state output.
The MBAC can read out the "ListEventID" value in the range from 0 to 255 with an accuracy of 1 for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service state output.
The MBAC can set the "ListEventID" value in the range from 0 to 255 with an accuracy of 1 for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service state output.
The MBAC can read out the "Cnt" value in the range from 0 to 255 with an accuracy of 1 for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service state output.
The MBAC can set the "Cnt" value in the range from 0 to 255 with an accuracy of 1 for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service state output.
The MBAC can read out the "StateIDx" value in the range from 0 to 255 with an accuracy of 1 for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service state output.
The MBAC can set the "StateIDx" value in the range from 0 to 255 with an accuracy of 1 for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service state output.
The MBAC can set the "State" value as a string for each virtual appicals device for the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service state output.
The MBAC can read out the "State" value as a string for each virtual appicals device for the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service state output.
Relative input
The MBAC can perform the appicals-I/O service relative input for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service relative input.
The MBAC can read out "Value" as a value in the range from 0 to 1000 with an accuracy of 1 for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service relative input.
The MBAC can set "Value" as a value in the range from 0 to 1000 with an accuracy of 1 for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service relative input.
Digital input
The MBAC can perform the appicals-I/O service digital input for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service digital input.
The MBAC can read out the value "State" (TRUE or FALSE) for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service digital input.
The MBAC can set the value "State" (TRUE or FALSE) for each virtual appicals device of the MBAC. To do so, the appicals device of the MBAC must have the appicals I/O service digital input.
| Caravan control unit illustration of additional equipment, function | GF54.21-D-5012TSA |
| Caravan control unit conforming additional equipment, function | GF54.21-D-5014TSA |
| Overview of system components of caravan control unit | GF54.21-D-9992TSA |