Remove/Install Side Load Compartment Paneling - Ar68.30-D-1185TS
Model 907.6
Shown with code D05 (super-high roof) and with code VA3 (load compartment interior trim up to roof height, washable)
| Notes on carrying out repair work in the vehicle interior | AH68.00-N-0001-01S | ||
| Remove/install | |||
| 1 | Remove detachable parts near the corresponding load compartment trim (1). | ||
| 2 | Remove fasteners for the corresponding load compartment trim (1). | The number and position of fasteners may vary depending on the vehicle equipment. |
|
| Fig 1 | |||
| 3 | Remove load compartment trim (1). | with code V42 (Sidewall tie-down rails on waist rail) Model 907.6 with code VC4 (Sidewall tie-down rails on roof frame) Installation: Ensure that the load compartment trim (1) is seated correctly on the tie-down rail. |
|
| 4 | Install in the reverse order |