Remove/Install Bottom Paneling For Dashboard On Driver Side - Ar68.10-D-1501TS

Model 907 

Shown on model 907 

Shown on model 907 

	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Notes on carrying out repair work in the vehicle interior		AH68.00-N-0001-01S
	Remove/install
1	Unclip trim (4) (arrow A) and remove.	Clip remover	Fig 1
2	Release lower center stowage compartment at instrument panel.		AR68.10-D-1513TS
3	Unscrew bolts (2).
4	Unclip lower trim (1) in upper area and remove until electrical connectors (3) are accessible.	Clip remover	Fig 1
5	Disconnect electrical connectors (3) and remove lower trim (1).	The number of electrical connectors (3) may vary depending on the vehicle equipment involved.
6	Install in the reverse order.
	Check
7	Perform function test of all control elements installed in lower trim (1).

Fig 1: Clip Remover (452 589 01 63 00)