Perform Additional Operations When Replacing Front Roof Lining - Ar68.30-D-7607-01TS

	Risk of injury  caused by slipping when clamping blade in the multicutter and by splinters when cutting out bonded windows	Wear protective gloves and safety glasses.	AS65.00-Z-0003-01A
	Notes on carrying out repair work in the vehicle interior		AH68.00-N-0001-01S

Model 907 

Shown on front roof lining (1) with code FF5 (Stowage box/tray above windshield) and with code FF8 (1-DIN slot at front below headliner) 

1. Shim front roof lining (1) in area to be processed with suitable spacers (e.g. foam or Styrofoam blocks).

   Do not use hard or sharp-edged objects as spacers.

   The cover of the front roof lining (1) will otherwise be damaged.

2. Make required cutouts (2, 3, 4, 5, 6) according to prepunched curring lines using suitable tool (e.g. a commercially available oscillating cutting tool).

   Depending on vehicle equipment.

   Adopt required cutouts (2, 3, 4, 5, 6) from old part for new part.