Check Indicator Lamps - AP54.00-D-5451-01TS

Risk of accident from vehicle starting off by itself when engine running. Risk of injury  (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off b itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

Model 907 

Shown on standard instrument cluster 

System errors are displayed on the multifunction display (A1p13) or on the display, warning and indicator lamps (A1 p14) or through constant illumination of the respective indicator or warning lamp.

1. Switch on ignition and check indicator and warning lamps as well as multifunction display (A1p13) and display, warning and indicator lamps (A1p14) for proper function.
2. Start engine and check that indicator and warning lamps have switched off.

   All indicator and warning lamps, except parking brake indicator lamp (A1e10), must go out.

   e.g. indicator lamps for turn signal light, low beam, high beam, rear fog light.

3. Check all further indicator and warning lamps for proper operation.

   To do so, operate parking brake; close hood, all doors and sliding doors.

4. Switch off engine.